# Atom **URL:** https://community.na.baicells.com/c/products/atom/6.md [Latest](https://community.na.baicells.com/latest.md) · [Categories](https://community.na.baicells.com/categories.md) --- ## [SNMP OID List - Outdoor CPE](https://community.na.baicells.com/t/snmp-oid-list-outdoor-cpe/154)
**Author:** [@jesse](https://community.na.baicells.com/u/jesse)\ **Replies:** 11\ **Last updated:** [October 1, 2025, 12:59pm UTC](https://community.na.baicells.com/t/snmp-oid-list-outdoor-cpe/154 "2025-10-01T12:59:29Z")
Due to high demand, I am posting the main SNMP OID list here for the outdoor CPE. There is no official MIB file yet. Model Name - 1.3.6.1.4.1.38595.10.1.3.0 Software Version - 1.3.6.1.4.1.38595.10.1.7.0 IMSI … --- ## [Problems reading SIM Cards](https://community.na.baicells.com/t/problems-reading-sim-cards/2119)
**Author:** [@Ismael\_Lobecio](https://community.na.baicells.com/u/Ismael_Lobecio)\ **Replies:** 1\ **Last updated:** [February 13, 2025, 10:34pm UTC](https://community.na.baicells.com/t/problems-reading-sim-cards/2119 "2025-02-13T22:34:48Z")
Hello I’m from a little town in Uruguay. We have a NOVA246 with a 120° sector, it worked perfectly except for a problem reading SIM Cards in my CPEs EG8013C (Atom OD6) I install my CPEs with their SIM card as it comes … --- ## [Release notes RTS\_3.7.11.13](https://community.na.baicells.com/t/release-notes-rts-3-7-11-13/1963)
**Author:** [@tkelley](https://community.na.baicells.com/u/tkelley)\ **Replies:** 0\ **Last updated:** [August 3, 2023, 1:08pm UTC](https://community.na.baicells.com/t/release-notes-rts-3-7-11-13/1963 "2023-08-03T13:08:25Z")
Can’t find release notes for that software which is shown as GA in OMC. --- ## [New firmware for CN62XX](https://community.na.baicells.com/t/new-firmware-for-cn62xx/911)
**Author:** [@ir.ghost](https://community.na.baicells.com/u/ir.ghost)\ **Replies:** 2\ **Last updated:** [December 10, 2022, 7:20am UTC](https://community.na.baicells.com/t/new-firmware-for-cn62xx/911 "2022-12-10T07:20:47Z")
Hi Is there any new firmware for this model? current version of my device: Running software version IDU-1.2.5-R15-Standard --- ## [Baicells Atom as Bridge Mode](https://community.na.baicells.com/t/baicells-atom-as-bridge-mode/965)
**Author:** [@Randy\_Dela\_Cruz](https://community.na.baicells.com/u/Randy_Dela_Cruz)\ **Replies:** 6\ **Last updated:** [November 10, 2022, 10:41pm UTC](https://community.na.baicells.com/t/baicells-atom-as-bridge-mode/965 "2022-11-10T22:41:22Z")
Hi, Is Baicells Atom can be configured as a bridge mode? We want to provide an IP address to the device behind it through a DHCP server. Regards, --- ## [Carrier Aggregation Setup With the ATOM low Gain](https://community.na.baicells.com/t/carrier-aggregation-setup-with-the-atom-low-gain/1444)
**Author:** [@Lee\_Premier](https://community.na.baicells.com/u/Lee_Premier)\ **Replies:** 0\ **Last updated:** [February 12, 2021, 7:02pm UTC](https://community.na.baicells.com/t/carrier-aggregation-setup-with-the-atom-low-gain/1444 "2021-02-12T19:02:20Z")
We are looking for a setup guide that shows how to configure the baicells atom for For Carrier Aggregation any ideas --- ## [CM11's Keep Loosing Internet](https://community.na.baicells.com/t/cm11s-keep-loosing-internet/1173)
**Author:** [@DVarner](https://community.na.baicells.com/u/DVarner)\ **Replies:** 3\ **Last updated:** [December 2, 2020, 4:45pm UTC](https://community.na.baicells.com/t/cm11s-keep-loosing-internet/1173 "2020-12-02T16:45:36Z")
Is anyone else having problems with the new CAT6 CM11’s? We keep having the radios randomly drop the internet connection and drop off the Cloud Core, however the radio is staying connected to the eNB. When the CPE is p… --- ## [How to get Beta Firmware](https://community.na.baicells.com/t/how-to-get-beta-firmware/1043)
**Author:** [@dsigman](https://community.na.baicells.com/u/dsigman)\ **Replies:** 2\ **Last updated:** [September 3, 2019, 2:40pm UTC](https://community.na.baicells.com/t/how-to-get-beta-firmware/1043 "2019-09-03T14:40:43Z")
Does anyone know how I can become a candidate for the beta firmwares? Thanks, --- ## [Configuration backup](https://community.na.baicells.com/t/configuration-backup/941)
**Author:** [@Michael\_Siemers](https://community.na.baicells.com/u/Michael_Siemers)\ **Replies:** 0\ **Last updated:** [February 28, 2019, 3:51pm UTC](https://community.na.baicells.com/t/configuration-backup/941 "2019-02-28T15:51:24Z")
Hi, I’m new to Baicells radios. Is there a way to backup the configuration once I have the settings I want saved on it? Thanks! --- ## [Uptime in Gen2 Outdoor CPE](https://community.na.baicells.com/t/uptime-in-gen2-outdoor-cpe/794)
**Author:** [@andy](https://community.na.baicells.com/u/andy)\ **Replies:** 0\ **Last updated:** [July 20, 2018, 2:13pm UTC](https://community.na.baicells.com/t/uptime-in-gen2-outdoor-cpe/794 "2018-07-20T14:13:46Z")
Hello, We have a few of the Atom OD04-19.5 Outdoor UE and I can’t seem to find the device uptime and connection time in the GUI anywhere. Is an SD card required to view this? --- ## [What is the purpose of the CPE?](https://community.na.baicells.com/t/what-is-the-purpose-of-the-cpe/782)
**Author:** [@RVeloso](https://community.na.baicells.com/u/RVeloso)\ **Replies:** 2\ **Last updated:** [July 18, 2018, 11:02pm UTC](https://community.na.baicells.com/t/what-is-the-purpose-of-the-cpe/782 "2018-07-18T23:02:37Z")
Hi, In a LTE deployment what is the purpose of the CPE? The UE attach to the eNB that will communicate with the cloud EPC. So whats exactly the function of the CPE and why it must support the eNB frequency band? Isn’t … --- ## [CPE model EG7035 Firmware](https://community.na.baicells.com/t/cpe-model-eg7035-firmware/543)
**Author:** [@marcomagna](https://community.na.baicells.com/u/marcomagna)\ **Replies:** 2\ **Last updated:** [November 3, 2017, 2:17pm UTC](https://community.na.baicells.com/t/cpe-model-eg7035-firmware/543 "2017-11-03T14:17:20Z")
Hello. My name is Marco Magnanelli. We are a Wireless ISP in Patagonia Argentina and this is our first test to Baicells We have just adquire a Nova R9 Starter Kit. I think this is the first Baicells device in Argentina… --- ## [Trouble finding Firmware in general](https://community.na.baicells.com/t/trouble-finding-firmware-in-general/538)
**Author:** [@elmorekevin](https://community.na.baicells.com/u/elmorekevin)\ **Replies:** 2\ **Last updated:** [November 1, 2017, 10:55pm UTC](https://community.na.baicells.com/t/trouble-finding-firmware-in-general/538 "2017-11-01T22:55:28Z")
Can you add a Downloads section under Support on the main page? That’s where I always want to look. BTW where can I find the newest IDU firmware? Thanks, Kevin --- ## [Atom CPE LAN status](https://community.na.baicells.com/t/atom-cpe-lan-status/490)
**Author:** [@elmorekevin](https://community.na.baicells.com/u/elmorekevin)\ **Replies:** 1\ **Last updated:** [September 12, 2017, 1:34pm UTC](https://community.na.baicells.com/t/atom-cpe-lan-status/490 "2017-09-12T13:34:40Z")
Where can I see the status of the LAN jack? We need to see if it’s up or down during troubleshooting, we commonly use this to make sure a device is getting power cycled or the right cable is being unplugged. Also, if it’… --- ## [User account enabled by default](https://community.na.baicells.com/t/user-account-enabled-by-default/487)
**Author:** [@elmorekevin](https://community.na.baicells.com/u/elmorekevin)\ **Replies:** 0\ **Last updated:** [September 7, 2017, 2:58pm UTC](https://community.na.baicells.com/t/user-account-enabled-by-default/487 "2017-09-07T14:58:21Z")
I’m not sure it’s wise to have the System User (non admin) account enabled by default. We’ve been instructed that if we want remote access, we must enable it. We have been doing this, but just discovered the user login … --- ## [Atom Feature Requests](https://community.na.baicells.com/t/atom-feature-requests/105)
**Author:** [@max](https://community.na.baicells.com/u/max)\ **Replies:** 1\ **Last updated:** [August 28, 2017, 6:51pm UTC](https://community.na.baicells.com/t/atom-feature-requests/105 "2017-08-28T18:51:57Z")
Let us know about any feature requests concerning the Atom you have below! --- ## [Baicells atom r9 indoor](https://community.na.baicells.com/t/baicells-atom-r9-indoor/448)
**Author:** [@amirdj](https://community.na.baicells.com/u/amirdj)\ **Replies:** 1\ **Last updated:** [August 22, 2017, 3:42pm UTC](https://community.na.baicells.com/t/baicells-atom-r9-indoor/448 "2017-08-22T15:42:15Z")
Hi dude I need last firmware BAICELLS ATOM R9 INDOOR can you help me? please Send to me thx --- ## [I need Atom R9 indoor Module Upgrade](https://community.na.baicells.com/t/i-need-atom-r9-indoor-module-upgrade/458)
**Author:** [@robert1989](https://community.na.baicells.com/u/robert1989)\ **Replies:** 0\ **Last updated:** [August 14, 2017, 8:00pm UTC](https://community.na.baicells.com/t/i-need-atom-r9-indoor-module-upgrade/458 "2017-08-14T20:00:44Z")
I need firmware . please Send to me. Product Model : CN6610 Hardware Version : CN6611 V3.3 UBOOT Version : 1.0.0 Atom R9 indoor --- ## [Baicells Atom R9 CPE](https://community.na.baicells.com/t/baicells-atom-r9-cpe/377)
**Author:** [@joshbalmer](https://community.na.baicells.com/u/joshbalmer)\ **Replies:** 0\ **Last updated:** [June 7, 2017, 7:53pm UTC](https://community.na.baicells.com/t/baicells-atom-r9-cpe/377 "2017-06-07T19:53:20Z")
Does the R9 has SIP Stack integrated? Is it VoLTE capable? --- ## [What is the PoE voltage range of the AtomR9-11dbi outdoor unit?](https://community.na.baicells.com/t/what-is-the-poe-voltage-range-of-the-atomr9-11dbi-outdoor-unit/325)
**Author:** [@Sloth](https://community.na.baicells.com/u/Sloth)\ **Replies:** 4\ **Last updated:** [May 18, 2017, 4:33am UTC](https://community.na.baicells.com/t/what-is-the-poe-voltage-range-of-the-atomr9-11dbi-outdoor-unit/325 "2017-05-18T04:33:45Z")
This product comes with a 12v PoE injector. That voltage is difficult to use for longer cable runs. Is it possible to operate this equipment with an 18v or 24v injector? It seems odd that this unit uses a different sta… --- ## [Atom r9 indoor 3.5ghz 5dbi](https://community.na.baicells.com/t/atom-r9-indoor-3-5ghz-5dbi/184)
**Author:** [@masoud](https://community.na.baicells.com/u/masoud)\ **Replies:** 2\ **Last updated:** [April 23, 2017, 8:14pm UTC](https://community.na.baicells.com/t/atom-r9-indoor-3-5ghz-5dbi/184 "2017-04-23T20:14:31Z")
I need firmware . please Send to me. Product Model : CN6610 Hardware Version : CN6611 V3.3 UBOOT Version : 1.0.0 --- ## [Default 192.168.1.0/24 network issues behind some routers](https://community.na.baicells.com/t/default-192-168-1-0-24-network-issues-behind-some-routers/185)
**Author:** [@jeremylu](https://community.na.baicells.com/u/jeremylu)\ **Replies:** 2\ **Last updated:** [December 30, 2016, 5:57pm UTC](https://community.na.baicells.com/t/default-192-168-1-0-24-network-issues-behind-some-routers/185 "2016-12-30T17:57:30Z")
Most of our customers have TP-Link routers, which are 192.168.0.0/24 by default, so the 192.168.1.1 gateway the CPE has is conflicting. Bridge mode is advantageous here, but seems to not be recommended/usable from BaiC… --- ## [CPE with external antenna ports](https://community.na.baicells.com/t/cpe-with-external-antenna-ports/101)
**Author:** [@chadpotts](https://community.na.baicells.com/u/chadpotts)\ **Replies:** 1\ **Last updated:** [November 16, 2016, 5:53pm UTC](https://community.na.baicells.com/t/cpe-with-external-antenna-ports/101 "2016-11-16T17:53:04Z")
Is any of the CPE units going to have dual antenna ports we can use. --- ## [About the Atom category](https://community.na.baicells.com/t/about-the-atom-category/15)
**Author:** [@jesse](https://community.na.baicells.com/u/jesse)\ **Replies:** 0\ **Last updated:** [October 20, 2016, 5:18pm UTC](https://community.na.baicells.com/t/about-the-atom-category/15 "2016-10-20T17:18:18Z")
Discussion concerning the Atom R9 CPEs.