# Nova **URL:** https://community.na.baicells.com/c/products/nova/7.md [Latest](https://community.na.baicells.com/latest.md) · [Categories](https://community.na.baicells.com/categories.md) --- ## [Nova 227 pBS11003: web GUI broken, SNMP and LTE service down — firmware recovery advice?](https://community.na.baicells.com/t/nova-227-pbs11003-web-gui-broken-snmp-and-lte-service-down-firmware-recovery-advice/2406)
**Author:** [@anderson.boettsche](https://community.na.baicells.com/u/anderson.boettsche)\ **Replies:** 3\ **Last updated:** [September 23, 2026, 12:46pm UTC](https://community.na.baicells.com/t/nova-227-pbs11003-web-gui-broken-snmp-and-lte-service-down-firmware-recovery-advice/2406 "2026-09-23T12:46:54Z")
Hello Baicells community, I am trying to recover a Nova 227 LTE eNodeB (hardware module pBS11003, revision A, 2300–2400 MHz) running BaiBS\_RTS\_3.7.11.8. It uses a remote EPC. I do not have access to a Baicells OMC. The… --- ## [Nova 430i Factory Reset](https://community.na.baicells.com/t/nova-430i-factory-reset/2378)
**Author:** [@jg105](https://community.na.baicells.com/u/jg105)\ **Replies:** 0\ **Last updated:** [February 24, 2026, 3:16pm UTC](https://community.na.baicells.com/t/nova-430i-factory-reset/2378 "2026-02-24T15:16:14Z")
Hello, Does anyone have an idea on how to factory reset the 4340i? I’m not seeing a pin hole next to or near the RJ45 port? Not seeing any other areas that would have a reset button? Jason --- ## [BaiBS\_RTS\_3.7.11.16](https://community.na.baicells.com/t/baibs-rts-3-7-11-16/2057)
**Author:** [@ncsnetwork](https://community.na.baicells.com/u/ncsnetwork)\ **Replies:** 0\ **Last updated:** [December 14, 2023, 2:17am UTC](https://community.na.baicells.com/t/baibs-rts-3-7-11-16/2057 "2023-12-14T02:17:38Z")
This firmware was available and now disappeared, was there an issue with it? We didn’t have any problem with it. What do you operators recommend as a stable version? --- ## [Nova 436Q SAS communication information logs](https://community.na.baicells.com/t/nova-436q-sas-communication-information-logs/2047)
**Author:** [@Haochen\_Wang](https://community.na.baicells.com/u/Haochen_Wang)\ **Replies:** 0\ **Last updated:** [December 1, 2023, 9:40pm UTC](https://community.na.baicells.com/t/nova-436q-sas-communication-information-logs/2047 "2023-12-01T21:40:17Z")
Hi Baicells community, I’m wondering if there’s any documentation for the SAS communication information logs produced by a Nova 436Q advanced two-carrier outdoor eNodeB registered as CBSD. I’m noticing abnormalities in … --- ## [License for nova products](https://community.na.baicells.com/t/license-for-nova-products/2020)
**Author:** [@moe](https://community.na.baicells.com/u/moe)\ **Replies:** 1\ **Last updated:** [October 25, 2023, 5:55pm UTC](https://community.na.baicells.com/t/license-for-nova-products/2020 "2023-10-25T17:55:46Z")
Hello , If i were to buy a base station for a private network is there a license i should buy with it or can i just buy the hardware and use it without the need for anything else --- ## [Firmware 1.19.6.7 SBS3270](https://community.na.baicells.com/t/firmware-1-19-6-7-sbs3270/2010)
**Author:** [@solinfnet.arthurs](https://community.na.baicells.com/u/solinfnet.arthurs)\ **Replies:** 0\ **Last updated:** [October 9, 2023, 3:15pm UTC](https://community.na.baicells.com/t/firmware-1-19-6-7-sbs3270/2010 "2023-10-09T15:15:46Z")
Hello, Can anyone send me the BaiBS\_QAFB\_1.19.6.7 version? I couldn’t find it anywhere. Thanks --- ## [Factory reset Nova 227](https://community.na.baicells.com/t/factory-reset-nova-227/1908)
**Author:** [@baendres](https://community.na.baicells.com/u/baendres)\ **Replies:** 1\ **Last updated:** [August 14, 2023, 7:01pm UTC](https://community.na.baicells.com/t/factory-reset-nova-227/1908 "2023-08-14T19:01:44Z")
I recently purchased a Nova 227 second hand to do some testing. I inadvertently locked myself out of the unit by changing the LAN IP address and I must have fat fingered it because I can’t access the unit at the address… --- ## [Antenna Ports on NOVA base station](https://community.na.baicells.com/t/antenna-ports-on-nova-base-station/196)
**Author:** [@NCN](https://community.na.baicells.com/u/NCN)\ **Replies:** 5\ **Last updated:** [August 15, 2022, 6:23pm UTC](https://community.na.baicells.com/t/antenna-ports-on-nova-base-station/196 "2022-08-15T18:23:01Z")
Hi we are getting ready to deploy our first few base stations using 90 degree KP sectors, my question is dose antenna 1 go to +45 & antenna 2 to -45 ? not sure if it matters but wanted to check before they go up on tower… --- ## [NOVA436Q Cell status inactive](https://community.na.baicells.com/t/nova436q-cell-status-inactive/1668)
**Author:** [@c\_C](https://community.na.baicells.com/u/c_C)\ **Replies:** 1\ **Last updated:** [March 3, 2022, 6:26pm UTC](https://community.na.baicells.com/t/nova436q-cell-status-inactive/1668 "2022-03-03T18:26:36Z")
Hi there, I’m trying to activate Nova436Q’s Cell Status to active. But it always inactive. It’s under BTS Info \> Basic Info \> Status Info \> Cell Status path. How can I do that? What equipment or parameter do I need? … --- ## [HaloB standalone](https://community.na.baicells.com/t/halob-standalone/1564)
**Author:** [@EugeneCrozier](https://community.na.baicells.com/u/EugeneCrozier)\ **Replies:** 0\ **Last updated:** [August 7, 2021, 11:37pm UTC](https://community.na.baicells.com/t/halob-standalone/1564 "2021-08-07T23:37:16Z")
I’m trying to use HaloB with a Nova 227, the firmware on the eNB is BaiBS\_RTS\_3.6.6, I’m finding the SIM information is not downloaded. The HaloB User Guide version 1.15 mentions BaiBS\_RTS\_3.7.6 where can I find this? --- ## [I Broke My 436Q - Factory Reset Options](https://community.na.baicells.com/t/i-broke-my-436q-factory-reset-options/1458)
**Author:** [@airocomm](https://community.na.baicells.com/u/airocomm)\ **Replies:** 2\ **Last updated:** [March 12, 2021, 1:28pm UTC](https://community.na.baicells.com/t/i-broke-my-436q-factory-reset-options/1458 "2021-03-12T13:28:04Z")
After changing some network settings I’m unable to get into the management interface (My fault, but that’s how you learn). The device pings but I get “Bad Gateway - The process did not produce any response” when trying t… --- ## [How to size capacity per user with a Nova 243?](https://community.na.baicells.com/t/how-to-size-capacity-per-user-with-a-nova-243/1276)
**Author:** [@RVeloso](https://community.na.baicells.com/u/RVeloso)\ **Replies:** 4\ **Last updated:** [March 11, 2021, 8:47pm UTC](https://community.na.baicells.com/t/how-to-size-capacity-per-user-with-a-nova-243/1276 "2021-03-11T20:47:03Z")
Hi! I’ve a use case where I need to provide Fixed Wireless Access. I’m considering to use a Nova 243 and a CPE CAT6. Nova 246 doesn’t fit here since to support B42 it would be only under customization and I dont have en… --- ## [NOVA 436Q RF Cables](https://community.na.baicells.com/t/nova-436q-rf-cables/1405)
**Author:** [@jnabakowski](https://community.na.baicells.com/u/jnabakowski)\ **Replies:** 0\ **Last updated:** [December 21, 2020, 3:03pm UTC](https://community.na.baicells.com/t/nova-436q-rf-cables/1405 "2020-12-21T15:03:28Z")
I am confused as to whether there is a specific order to connecting the RF Cables to the eNb. I read thru the documentation and I am aware antenna 1 goes to one side, and antenna 2 goes the other. Found this in the docu… --- ## [Nova 246 on low frequency Band 41](https://community.na.baicells.com/t/nova-246-on-low-frequency-band-41/1387)
**Author:** [@kgehrts](https://community.na.baicells.com/u/kgehrts)\ **Replies:** 1\ **Last updated:** [December 11, 2020, 7:17pm UTC](https://community.na.baicells.com/t/nova-246-on-low-frequency-band-41/1387 "2020-12-11T19:17:41Z")
Hello. I have a strange issue with my Nova 246s. This persists no matter the Firmware version (3.5.5, 3.6.6, 3.6.7) or model of MiFi, Indoor CPE, outdoor CPE or Firmware/Module Firmware on those units. I have 4 243s usin… --- ## [LGW and Cloud EPC](https://community.na.baicells.com/t/lgw-and-cloud-epc/1241)
**Author:** [@brandonshiers](https://community.na.baicells.com/u/brandonshiers)\ **Replies:** 1\ **Last updated:** [July 28, 2020, 5:41am UTC](https://community.na.baicells.com/t/lgw-and-cloud-epc/1241 "2020-07-28T05:41:13Z")
We do bridged mode with our Telrad so any tips on getting that working would be great as well. At this point I would like to stick with the cloud EPC for testing if we can get it working with Bridged and LGW mode on the… --- ## [Setup VLANS on Nova eNB](https://community.na.baicells.com/t/setup-vlans-on-nova-enb/460)
**Author:** [@cameron.kilton](https://community.na.baicells.com/u/cameron.kilton)\ **Replies:** 4\ **Last updated:** [June 9, 2020, 2:47pm UTC](https://community.na.baicells.com/t/setup-vlans-on-nova-enb/460 "2020-06-09T14:47:49Z")
Many have asked if they can setup VLANs on Baicells eNB. For a long time for a lack of understanding the answer was No. We had some issues to determine which way the S1 traffic would flow. (This will be addressed with a … --- ## [New Firmware 3.3.14 breaks LGW! 30-May-2020](https://community.na.baicells.com/t/new-firmware-3-3-14-breaks-lgw-30-may-2020/1209)
**Author:** [@k5mob](https://community.na.baicells.com/u/k5mob)\ **Replies:** 7\ **Last updated:** [June 4, 2020, 3:44am UTC](https://community.na.baicells.com/t/new-firmware-3-3-14-breaks-lgw-30-may-2020/1209 "2020-06-04T03:44:29Z")
New firmware breaks LGW! So we installed the new firmware this weekend. We use LGW bound to vlan10 to push public addresses out to the customers. On the new firmware your routing table attempts to send traffic out the 1… --- ## [360° coverage with 65° Nova 227](https://community.na.baicells.com/t/360-coverage-with-65-nova-227/1016)
**Author:** [@lovinglte](https://community.na.baicells.com/u/lovinglte)\ **Replies:** 1\ **Last updated:** [July 8, 2019, 9:52am UTC](https://community.na.baicells.com/t/360-coverage-with-65-nova-227/1016 "2019-07-08T09:52:02Z")
Hi everyone, I’m really interested in the Nova 227 as it perfectly fits my needs for a low-powered, low capacity base station covering a small service area with a radius of approximately 2km. The problem is that I need… --- ## [Looking to offload 5 Nova R9's](https://community.na.baicells.com/t/looking-to-offload-5-nova-r9s/1017)
**Author:** [@Andrew\_Powell](https://community.na.baicells.com/u/Andrew_Powell)\ **Replies:** 0\ **Last updated:** [July 3, 2019, 11:53pm UTC](https://community.na.baicells.com/t/looking-to-offload-5-nova-r9s/1017 "2019-07-03T23:53:50Z")
We are folding on Baicells, it isn’t even remotely close to worth our time at this point. We have 5 Nova R9’s 4 used and 1 in the box. We could talk about selling our license in the package as well. Email me at andy@b… --- ## [Firmware location](https://community.na.baicells.com/t/firmware-location/925)
**Author:** [@Chris\_Christian](https://community.na.baicells.com/u/Chris_Christian)\ **Replies:** 1\ **Last updated:** [February 26, 2019, 6:13pm UTC](https://community.na.baicells.com/t/firmware-location/925 "2019-02-26T18:13:28Z")
Please place links or descriptions here for all firmware locations --- ## [SNF Port, Spectrum Analyzer?](https://community.na.baicells.com/t/snf-port-spectrum-analyzer/128)
**Author:** [@pjeptha](https://community.na.baicells.com/u/pjeptha)\ **Replies:** 5\ **Last updated:** [February 21, 2019, 10:23pm UTC](https://community.na.baicells.com/t/snf-port-spectrum-analyzer/128 "2019-02-21T22:23:57Z")
Good Morning, I was curious if/when the SNF port would be used? I understand from the User Manual of the Nova9 B42/43 that the SNF port is a Sniffer port. My interpretation of that is to mean a spectrum analyzer, is th… --- ## [UE not connecting to nova 227](https://community.na.baicells.com/t/ue-not-connecting-to-nova-227/692)
**Author:** [@hchenji](https://community.na.baicells.com/u/hchenji)\ **Replies:** 6\ **Last updated:** [May 18, 2018, 12:41am UTC](https://community.na.baicells.com/t/ue-not-connecting-to-nova-227/692 "2018-05-18T00:41:07Z")
Hi, We have a local EPC that a Nova 227 is connected to (S1AP successful). Our UE is an Essential PH-1 phone. It is unable to connected to the eNB. Any thoughts on why this cannot be done? Can I see the logs somehow? --- ## [Nova 233 DC power plug type](https://community.na.baicells.com/t/nova-233-dc-power-plug-type/725)
**Author:** [@hchenji](https://community.na.baicells.com/u/hchenji)\ **Replies:** 0\ **Last updated:** [May 7, 2018, 9:31pm UTC](https://community.na.baicells.com/t/nova-233-dc-power-plug-type/725 "2018-05-07T21:31:15Z")
What’s the connector/type or model number of the green DC power connector that ships with the Nova 233? It has two square prongs, with a slit in each of them. --- ## [Link loss between the indoor cpe and eNB](https://community.na.baicells.com/t/link-loss-between-the-indoor-cpe-and-enb/724)
**Author:** [@Rav](https://community.na.baicells.com/u/Rav)\ **Replies:** 0\ **Last updated:** [May 2, 2018, 5:14pm UTC](https://community.na.baicells.com/t/link-loss-between-the-indoor-cpe-and-enb/724 "2018-05-02T17:14:01Z")
Hello ! We are observing a problem with the link loss between the indoor cpe and 10w eNB . Indoor cpe has folowing conditions: Bandwidth 10 MHz RSSI -69 dBm RSRP0 -104.22 dBm RSRP1 -104.92 dBm RSRQ -8.29 dB S… --- ## [Convert directional to omni for pBS2120](https://community.na.baicells.com/t/convert-directional-to-omni-for-pbs2120/704)
**Author:** [@hchenji](https://community.na.baicells.com/u/hchenji)\ **Replies:** 1\ **Last updated:** [April 23, 2018, 1:49am UTC](https://community.na.baicells.com/t/convert-directional-to-omni-for-pbs2120/704 "2018-04-23T01:49:27Z")
Hi, I would like to replace the internal antennas in the pBS2120 we have, with omni antennas. Can we take off the cover and connect omnis to the antenna ports? Will this void our warranty or trigger an intrusion detec… --- ## [Nova Feature Requests](https://community.na.baicells.com/t/nova-feature-requests/106)
**Author:** [@max](https://community.na.baicells.com/u/max)\ **Replies:** 0\ **Last updated:** [November 16, 2016, 10:00pm UTC](https://community.na.baicells.com/t/nova-feature-requests/106 "2016-11-16T22:00:26Z")
Let us know about any feature requests concerning the Nova you have below! --- ## [PHY RX GAIN parameter](https://community.na.baicells.com/t/phy-rx-gain-parameter/299)
**Author:** [@Sloth](https://community.na.baicells.com/u/Sloth)\ **Replies:** 1\ **Last updated:** [February 23, 2018, 5:36pm UTC](https://community.na.baicells.com/t/phy-rx-gain-parameter/299 "2018-02-23T17:36:47Z")
How does the PHYRXGAIN parameter affect the base station? How should this be set? --- ## [Looking for the 1Watt eNB FCC ID Number](https://community.na.baicells.com/t/looking-for-the-1watt-enb-fcc-id-number/494)
**Author:** [@airlinkrb](https://community.na.baicells.com/u/airlinkrb)\ **Replies:** 1\ **Last updated:** [October 7, 2017, 5:03pm UTC](https://community.na.baicells.com/t/looking-for-the-1watt-enb-fcc-id-number/494 "2017-10-07T17:03:47Z")
I am registering new sites and need to know what the FCC ID Number is for the eNB? Casey --- ## [Weather Sealing](https://community.na.baicells.com/t/weather-sealing/343)
**Author:** [@jason1](https://community.na.baicells.com/u/jason1)\ **Replies:** 2\ **Last updated:** [October 3, 2017, 4:00pm UTC](https://community.na.baicells.com/t/weather-sealing/343 "2017-10-03T16:00:09Z")
I'm getting ready to deploy my first Nova R9 and I'm interested to know what is recommended for weather sealing. I've sealed up the two main antenna connectors, but what about the GPS connector? With the electrical tap… --- ## [Enable KPI stats on Nova](https://community.na.baicells.com/t/enable-kpi-stats-on-nova/507)
**Author:** [@elmorekevin](https://community.na.baicells.com/u/elmorekevin)\ **Replies:** 0\ **Last updated:** [September 25, 2017, 3:02pm UTC](https://community.na.baicells.com/t/enable-kpi-stats-on-nova/507 "2017-09-25T15:02:53Z")
Where can I enable this? I see the entry listed in the CloudCore that it is currently off on our base stations? I realize we can see the RF Utilization live in the radio, but we really need to be able to see some graphe… [Next page](https://community.na.baicells.com/c/products/nova/7.md?page=1)