# 11dBi CPE reflector and mount

**URL:** https://community.na.baicells.com/t/11dbi-cpe-reflector-and-mount/431
**Category:** Products
**Created:** [July 20, 2017, 3:51pm UTC](https://community.na.baicells.com/t/11dbi-cpe-reflector-and-mount/431 "2017-07-20T15:51:40Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![elmorekevin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.na.baicells.com/elmorekevin/32/237_2.png) [@elmorekevin](https://community.na.baicells.com/u/elmorekevin)
#### Post date: [July 20, 2017, 3:51pm UTC](https://community.na.baicells.com/t/11dbi-cpe-reflector-and-mount/431/1 "2017-07-20T15:51:40Z")

</div>

We just received our first reflectors and holders for the 11 dBi CPE. Does anyone else think they could have softened the edges of the metal holder better?

---

<div class="post-metadata">

### Author: ![rick.harnish](https://sea2.discourse-cdn.com/flex016/user_avatar/community.na.baicells.com/rick.harnish/32/17_2.png) [@rick.harnish](https://community.na.baicells.com/u/rick.harnish)
#### Post date: [July 20, 2017, 5:39pm UTC](https://community.na.baicells.com/t/11dbi-cpe-reflector-and-mount/431/2 "2017-07-20T17:39:31Z")

</div>

I believe KP Performance is aware of this. This is a Generation 1 mount. They are working on a better version.