# Atom CPE LAN status

**URL:** <https://community.na.baicells.com/t/atom-cpe-lan-status/490>\
**Category:** Atom\
**Created:** [September 11, 2017, 7:42pm UTC](https://community.na.baicells.com/t/atom-cpe-lan-status/490 "2017-09-11T19:42:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![elmorekevin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.na.baicells.com/elmorekevin/32/237_2.png) [@elmorekevin](https://community.na.baicells.com/u/elmorekevin)\
**Post date:** [September 11, 2017, 7:42pm UTC](https://community.na.baicells.com/t/atom-cpe-lan-status/490/1 "2017-09-11T19:42:24Z")

</div>

Where can I see the status of the LAN jack? We need to see if it’s up or down during troubleshooting, we commonly use this to make sure a device is getting power cycled or the right cable is being unplugged. Also, if it’s 10/100 H/F etc.

Can we disable the LAN jack? Sometimes we do this for non-payment. I guess here we could clamp down the SIM card in the BOSS, but it’d be nice to have that option.

---

<div class="post-metadata">

**Author:** ![hanson](https://avatars.discourse-cdn.com/v4/letter/h/9e8a1a/32.png) [@hanson](https://community.na.baicells.com/u/hanson)\
**Post date:** [September 12, 2017, 1:34pm UTC](https://community.na.baicells.com/t/atom-cpe-lan-status/490/2 "2017-09-12T13:34:40Z")

</div>

I’ve shot the same question to support for the same reasons…  
This was there response:

[spoiler]  
Cameron Kilton (BaiCells Technologies) Aug 16, 8:26 PM CDT

Yes, it’s coming in a upcoming firmware by end of month-ish.

Cameron Kilton  
Baicells Technologies, N.A. Inc.[/spoiler]