# BaiTip of the Day - November 30th, 2016 - Atom UE WAN Interface Access

**URL:** <https://community.na.baicells.com/t/baitip-of-the-day-november-30th-2016-atom-ue-wan-interface-access/142>\
**Category:** BaiTips\
**Created:** [November 30, 2016, 4:52pm UTC](https://community.na.baicells.com/t/baitip-of-the-day-november-30th-2016-atom-ue-wan-interface-access/142 "2016-11-30T16:52:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rick.harnish](https://sea2.discourse-cdn.com/flex016/user_avatar/community.na.baicells.com/rick.harnish/32/17_2.png) [@rick.harnish](https://community.na.baicells.com/u/rick.harnish)\
**Post date:** [November 30, 2016, 4:52pm UTC](https://community.na.baicells.com/t/baitip-of-the-day-november-30th-2016-atom-ue-wan-interface-access/142/1 "2016-11-30T16:52:30Z")

</div>

Many operators seem to have missed the previous posts or overlooked a configuration in the Atom UE/CPE Web GUI to allow HTTPs Login from the WAN interface. By default, the UE firmware blocks access to web GUI from WAN and enabling access will require further configuration:

1. Log into the CPE web GUI, then open the WEB Setting menu (System-\>WEB Setting).
2. Enable “Allow HTTPs Login from WAN”, then click Submit.  
:  
 ![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex016/uploads/baicells/original/1X/fcba6edac8095972ff9a752bd40fc00f20ad7913.jpg)

To login to the UE remotely, type the WAN IP address of the eNodeB followed by :5(last four digits of the IMSI number of the SIM card in the UE) into a web browser. In other words, https://X.X.X.X:5xxxx

---

<div class="post-metadata">

**Author:** ![chadpotts](https://avatars.discourse-cdn.com/v4/letter/c/35a633/32.png) [@chadpotts](https://community.na.baicells.com/u/chadpotts)\
**Post date:** [December 1, 2016, 5:06am UTC](https://community.na.baicells.com/t/baitip-of-the-day-november-30th-2016-atom-ue-wan-interface-access/142/2 "2016-12-01T05:06:50Z")

</div>

So do we need to setup a route on our network to reach this or is this just for the LGW setup thanks.

---

<div class="post-metadata">

**Author:** ![tangweizhuo](https://avatars.discourse-cdn.com/v4/letter/t/bcef8e/32.png) [@tangweizhuo](https://community.na.baicells.com/u/tangweizhuo)\
**Post date:** [December 1, 2016, 5:39am UTC](https://community.na.baicells.com/t/baitip-of-the-day-november-30th-2016-atom-ue-wan-interface-access/142/3 "2016-12-01T05:39:18Z")

</div>

HI Chad,

Yes, you need setup LGW and enable route to access Atom. following url may help you.

[http://community.na.baicells.com/t/baitip-of-the-day-november-30th-2016-atom-ue-wan-interface-access/142](http://community.na.baicells.com/t/baitip-of-the-day-november-30th-2016-atom-ue-wan-interface-access/142)

[http://community.na.baicells.com/t/enb-basestation-lgw-router-mode-configuration-example/89](http://community.na.baicells.com/t/enb-basestation-lgw-router-mode-configuration-example/89)