# BCE-ODU-1.0.1 - New outdoor CPE firmware has been released! **URL:** \ **Category:** Announcements\ **Created:** [January 19, 2017, 6:06pm UTC](https://community.na.baicells.com/t/bce-odu-1-0-1-new-outdoor-cpe-firmware-has-been-released/205 "2017-01-19T18:06:28Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@jesse](https://community.na.baicells.com/u/jesse)\ **Post date:** [January 19, 2017, 6:06pm UTC](https://community.na.baicells.com/t/bce-odu-1-0-1-new-outdoor-cpe-firmware-has-been-released/205/1 "2017-01-19T18:06:28Z")
BCE-ODU-1.0.1 for Atom R9 Outdoor (11/19.5 dBi) CPEs has been released. To upgrade UE firmware to BCE-ODU-1.0.1 from Web GUI: 1. Log into CPE with username/password. 2. Go to System-\>Version Manager page. 3. Click on “Choose File” and select the new firmware. 4. Click Submit. To upgrade UE firmware from the OMC: 1. Navigate to the CPE-\>Strategy-\>Upgrade page. 2. Click the Add button in the Upgrade Task pane. 3. Schedule the upgrade by following the steps in the New Upgrade Task window. **3/8/17 UPDATE:** Stability issues were found in version 1.0.1 which causes the CPE to lock-up after a 15-day runtime. The link has been replaced with version 1.0.3 which is a stop-gap version until the stability bug is fully resolved. Version 1.0.3 adds an automatic reboot feature which reboots the CPE every 7 days. Download: [https://na.baicells.com/download/BCE-ODU-1.0.3-20170215.tgz](https://na.baicells.com/download/BCE-ODU-1.0.3-20170215.tgz) Changelog: ``` ========================== Version BCE-ODU-1.0.1 -------------------------- New Features: - Added: Changed default LAN IP to 192.168.254.1 - Removed: Most Recently Used Table (MRU) Bug Fixes: - Fixed: RRC camping bug causing UE to be stuck in EMM-DEREGISTERED state - Fixed: PCI Lock bug - Fixed: TR069 bug which causes CPE to reboot if socket closes prematurely - Fixed: Networking bug which can cause existing threads to use old IP address after CPE reattach Improvements: - Improved: Detection of USIM - Improved: Requirement to reboot CPE again if upgrading from firmware version R5 Known Issues: - Issue: A manual reboot may still be required if upgrading from firmware version R5 (10% of R5 CPEs required a second reboot from lab tests) - Issue: S1 reconnect may cause default route to drop ``` ---
**Author:** ![Chris](https://sea2.discourse-cdn.com/flex016/user_avatar/community.na.baicells.com/chris/32/156_2.png) [@Chris](https://community.na.baicells.com/u/Chris)\ **Post date:** [January 21, 2017, 5:14am UTC](https://community.na.baicells.com/t/bce-odu-1-0-1-new-outdoor-cpe-firmware-has-been-released/205/2 "2017-01-21T05:14:54Z")
> [@jesse](#): > > new This one is not for the 2.5GHz ODUs, right? ---
**Author:** ![jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@jesse](https://community.na.baicells.com/u/jesse)\ **Post date:** [January 23, 2017, 8:44pm UTC](https://community.na.baicells.com/t/bce-odu-1-0-1-new-outdoor-cpe-firmware-has-been-released/205/3 "2017-01-23T20:44:11Z")
This version is for 2.5GHz ODUs as well. 🙂 ---
**Author:** ![Northwoodstech](https://avatars.discourse-cdn.com/v4/letter/n/4af34b/32.png) [@Northwoodstech](https://community.na.baicells.com/u/Northwoodstech)\ **Post date:** [February 14, 2017, 11:43pm UTC](https://community.na.baicells.com/t/bce-odu-1-0-1-new-outdoor-cpe-firmware-has-been-released/205/4 "2017-02-14T23:43:42Z")
Having an issue after updating firmware, it does not complete after waiting for 15 mins then when I click out of it , I can’t log into the cpe via 192.168.1.1. Any thoughts? CPE still has connectivity to internet tho. ---
**Author:** ![jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@jesse](https://community.na.baicells.com/u/jesse)\ **Post date:** [February 15, 2017, 1:03am UTC](https://community.na.baicells.com/t/bce-odu-1-0-1-new-outdoor-cpe-firmware-has-been-released/205/5 "2017-02-15T01:03:45Z")
CPE IP address will change to 192.168.254.1 after upgrade. ---
**Author:** ![dlogan](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@dlogan](https://community.na.baicells.com/u/dlogan)\ **Post date:** [March 8, 2017, 3:34pm UTC](https://community.na.baicells.com/t/bce-odu-1-0-1-new-outdoor-cpe-firmware-has-been-released/205/6 "2017-03-08T15:34:44Z")
Do the CPE units not get/give a LAN IP while not associated to it’s LTE AP? I’m looking to upgrade firmware in-shop before deploying customer equipment. Thanks. ---
**Author:** ![jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@jesse](https://community.na.baicells.com/u/jesse)\ **Post date:** [March 8, 2017, 9:48pm UTC](https://community.na.baicells.com/t/bce-odu-1-0-1-new-outdoor-cpe-firmware-has-been-released/205/7 "2017-03-08T21:48:14Z")
By default, the CPE has DHCP server enabled and will hand out an IP address over the LAN interface. Please note that the CPE IP address changes to 192.168.254.1 after the upgrade. I have also updated the post to link to version 1.0.3 as version 1.0.1 has a critical stability issue. ---
**Author:** ![rick.harnish](https://sea2.discourse-cdn.com/flex016/user_avatar/community.na.baicells.com/rick.harnish/32/17_2.png) [@rick.harnish](https://community.na.baicells.com/u/rick.harnish)\ **Post date:** [March 10, 2017, 4:02pm UTC](https://community.na.baicells.com/t/bce-odu-1-0-1-new-outdoor-cpe-firmware-has-been-released/205/8 "2017-03-10T16:02:19Z")
Update to BCE-ODU-1.0.3 [https://baicells.zendesk.com/hc/en-us/articles/115004150448-BCE-ODU-1-0-3](https://baicells.zendesk.com/hc/en-us/articles/115004150448-BCE-ODU-1-0-3) ---
**Author:** ![javad666n](https://sea2.discourse-cdn.com/flex016/user_avatar/community.na.baicells.com/javad666n/32/423_2.png) [@javad666n](https://community.na.baicells.com/u/javad666n)\ **Post date:** [September 1, 2021, 4:21pm UTC](https://community.na.baicells.com/t/bce-odu-1-0-1-new-outdoor-cpe-firmware-has-been-released/205/9 "2021-09-01T16:21:54Z")
hi i deleted some files in my cpe cw0100 outdor lte ( i mean modem system file’s) and my modem dont assign ip anymore its need to flash firmware by other ways how can i cannect it to com port or usb to flash it again ? its dont have usb port how can i connect wire’s to pcb and flash by com port ? is that possible ?