# RTS 3.6.6 - New eNB software has been released! **URL:** \ **Category:** Announcements\ **Created:** [September 11, 2020, 10:47pm UTC](https://community.na.baicells.com/t/rts-3-6-6-new-enb-software-has-been-released/1303 "2020-09-11T22:47:42Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@jesse](https://community.na.baicells.com/u/jesse)\ **Post date:** [September 11, 2020, 10:47pm UTC](https://community.na.baicells.com/t/rts-3-6-6-new-enb-software-has-been-released/1303/1 "2020-09-11T22:47:42Z")
RTS 3.6.6 for Nova R9 TDD base stations has been released. This version includes many bug fixes, improves on the SAS configuration procedure, and adds a number of new features including SNMP, PFS scheduler, and iPerf3. **Supported Hardware:** Nova 243 _(2\*10W eNB | BRU3501,3510,3511,3528)_ Nova 233 _(2\*1W eNB | mBS1100,1105,11002,11003,11004,11005,11006,11007)_ Nova 227 _(2\*250mW eNB | pBS2120,11001,11002,11003,11004,11005,11006)_ **Software Download:** [https://na.baicells.com/download/BaiBS\_RTS\_3.6.6.IMG](https://na.baicells.com/download/BaiBS_RTS_3.6.6.IMG) **Related Documents:** - SNMP MIB: [https://na.baicells.com/download/RTS%203.6%20BAICELLS-MIB.mib](https://na.baicells.com/download/RTS%203.6%20BAICELLS-MIB.mib) - SNMP Alarm MIB: [https://na.baicells.com/download/RTS%203.6%20ALARMTRAPS-MIB.mib](https://na.baicells.com/download/RTS%203.6%20ALARMTRAPS-MIB.mib) All other related documents, including Configuration & Network Administration Guide and SAS User Guide can be found on our [documentation website](http://www.baicells.com/Service/Documents). **Changelog:** ``` ========================== Version BaiBS_RTS_3.6.6 -------------------------- New Features: - Added: SAS multi-step registration - Added: Improved SAS channel selection logic (added prefered freq, bandwidth, and power paramters under Quick Settings) - Added: Legacy mode when SAS is enabled for B42/B43 support - Added: Ability to upload P12 format CPI certificate on eNB GUI - Added: Auto button to generate Install Certification Time field value - Added: SNMP - Added: PFS scheduler - Added: Iperf3 - Added: UL 64QAM can be enabled/disabled from webGUI - Added: Support eNB management from LGW subnet - Added: Hysteresis and Time-to-Trigger configuration for A1,A2,A3,A5, and Measurement Control Parameters - Added: Cell ID label changed to ECI - Added: Web login timeout is now adjustable - Added: SCTP port configuration from GUI - Added: Tcpdump can be ran from admin user via SSH - Added: Display IMSIs when LGW is disabled - Added: Display eNB IPSec address on IPsec page - Added: Display total aggregate throughput on Basic Info page - Added: Display eNB name on Basic Info page - Added: Display X2 status Bug Fixes: - Fixed: Space characters not supported in CPI Name field - Fixed: Under SAS settings special characters were not allowed for user ID, FCC ID and callsign. - Fixed: When HaloB and SAS are both enabled, the certificate page is hidden - Fixed: SAS registration fails when SAS is disabled, eNB is restarted, and SAS is re-enabled - Fixed: Frequency value may display as null when SAS is enabled - Fixed: After the 10W base station restores the default configuration, the base station transmit power becomes 30dBm - Fixed: After upgrading to 3.5, the 10W base station cannot be configured to use more than 30dBm power - Fixed: In SA 0 case, PRB utilization sometimes is shown over 100% in the syslog - Fixed: In 32 UE case, when a UE goes offline the RLF access process is repeated - Fixed: Importing config file in webGUI may fail - Fixed: eNB may reboot when spectrum scan is started - Fixed: UL and DL throughput unit was not being displayed correctly - Fixed: "Restore default configuration" option doesnt set the configuration back to cloud EPC - Fixed: Downlink GBR cannot be guaranteed - Fixed: Dedicated bearer priority cannot be guaranteed - Fixed: After IPsec connection is restored, MME still shows disconnected - Fixed: Importing 1588 license from OMC will fail - Fixed: Cell available KPI is not accurate - Fixed: Service interruption after X2 handovers when using M11 CPEs - Fixed: Upgrading without preserve settings from OMC may fail - Fixed: Traffic is broken when using LGW router mode with static binding - Fixed: Changing password in Firefox or Safari browser does not work - Fixed: eNB coredump when there is heavy UDP DL traffic - Fixed: Memory alarm 11111 is incorrectly reported - Fixed: IPsec may not rebuild after disconnection - Fixed: eNB coredump during 96 UE stress test - Fixed: X2 setup may fail - Fixed: Country code may not change - Fixed: MME inteface binding cannot change after being set to PPPoE - Fixed: OMC still displays IPsec address when IPsec is disconnected - Fixed: "Power level is not correct" message prompt when Cloud EPC is enabled - Fixed: SCTP and X2 alarms may not automatically clear - Fixed: WAN packet loss rate is calculated incorrectly ``` ---
**Author:** ![wirelessdatanet](https://avatars.discourse-cdn.com/v4/letter/w/b5e925/32.png) [@wirelessdatanet](https://community.na.baicells.com/u/wirelessdatanet)\ **Post date:** [May 19, 2021, 10:33pm UTC](https://community.na.baicells.com/t/rts-3-6-6-new-enb-software-has-been-released/1303/2 "2021-05-19T22:33:55Z")
Do you think we could fix the link for documentation website for the guides on this page?? " Guide can be found on our [documentation website]"