QRTB 2.10.6 - New eNB software has been released!

QRTB 2.10.6 for Nova 436Q/430 and Neutrino 430 TDD base stations has been released. This version mainly adds support for IPv6, 4 Users per TTI, and asymmetric CA configuration (20+15M).

Supported Hardware:

  • Nova 436Q (4*1W Outdoor eNB | mBS31001)
  • Nova 430e (4*250mW Outdoor eNB | pBS3101SE)
  • Nova 430i (4*250mW Outdoor eNB | pBS3101S)
  • Neutrino 430 (4*250mW Indoor eNB | pBS31010)

Software Download: https://na.baicells.com/download/BaiBS_QRTB_2.10.6.IMG

Changelog:

==========================
Version BaiBS_QRTB_2.10.6
---------------------------
New Features:
- Added: Support IPv6
- Added: Support configuration of asymmetric CA in LMT (20+15M)
- Added: Add a switch to modify the LMT port and type (HTTP/HTTPS)
- Added: Add throughput metric on the Basic Info page
- Added: Support adding neighbor cells without requiring a reboot
- Added: Display subnet, gateway and DNS fields on WAN page when set to DHCP
- Added: Add Sync Adjust Parameter section to LTE > Advance page
- Added: Support 4 Users per TTI
- Added: Support Plug-and-Play feature
- Added: Add Parallel Stream field on iPerf diagnostics page when Client and TCP are set

Improvements:
- Improved: Move the Diagnostics page back to the System menu 
- Improved: Move Core Net to Network menu
- Improved: List Cloud Key on Quick Settings and Core Network page
- Improved: Interface field on iPerf Diagnostics page will prefill IP address
- Improved: Working mode set to 32 users by default
- Improved: Cell name modifies eNodeB name in LMT
- Improved: Prohibit OMC from adding the same PLMN multiple times  

Bug Fixes:
- Fixed: Power modify can be set when SAS is enabled
- Fixed: UE signaling (RRC/NAS) count > 30 will cause MAC-I calculation error
- Fixed: DNS configuration is OFF by default
- Fixed: Adding a neighbor cell will list the same cell twice
- Fixed: Reorder core network mode options in LMT
- Fixed: X2 status shows error when eNB type is macro
- Fixed: Configure neighbor cell error when X2 is enable
- Fixed: Low UL throughput after X2 handover
- Fixed: GPS values are not being reported correctly via TR069
- Fixed: Webgui overview page may be blank upon initial login
- Fixed: NTP not properly setting time upon restoration of the network after reboot
- Fixed: Correct "oam ready" event output in keylog
- Fixed: MME connection may not establish in Cloud EPC configuration
- Fixed: Unable to change cell name in webGUI