QRTB 2.8.10 for Nova 436Q/430 and Neutrino 430 TDD base stations has been released. This version mainly adds support for uplink carrier aggregation and a revamped webGUI. Note that all SAS configuration settings have been moved to the Quick Settings page in the new UI.
NOTICE: CURRENT CAT15 FIRMWARE DOES NOT SUPPORT UL CA. For Cat6 CPEs, UL CA support is added in BaiCE_BG_1.6.20.
Supported Hardware:
Nova 436Q (4*1W Outdoor eNB | mBS31001)
Nova 430 (4*250mW Outdoor eNB | pBS3101SE)
Nova 430i (4*250mW Outdoor eNB | pBS3101S)
Neutrino 430 (4*250mW Indoor eNB | pBS31010)
Software Download: https://na.baicells.com/download/BaiBS_QRTB_2.8.10.IMG
Changelog:
==========================
Version BaiBS_QRTB_2.8.10
--------------------------
New Features:
- Added: Uplink CA
- Added: 1588v2 (Neutrino 430 only)
- Added: Signaling trace
- Added: NSA (Non-Standalone)
- Added: "Override Cloud OMC URL" switch on Management Server page
- Added: eNB name field in webGUI
- Added: PRACH Root Sequence field in webGUI
- Added: Support password reset from OMC
- Added: "Antenna Configuration" parameter to set number of antennas used in DC mode
- Added: Support changing SCTP port in webGUI and OMC
- Added: Power range can drop to 0dBm when SAS is enabled
Improvements:
- Improved: webGUI is revamped to a more modern UI
- Improved: Default eNB name contains serial number
- Improved: eNB name field added to webGUI
- Improved: PRACH root sequence index added to webGUI
- Improved: SAS configuration moved to Quick Settings page
- Improved: Faster boot time
- Improved: Rename Legacy Mode options to "Enable" and "Disable"
- Improved: Hide IPsec fields on Basic Info page when IPsec is disabled
- Improved: Cloud EPC switch is enabled by default
- Improved: Set default web port to 443 (HTTPS)
- Improved: Print rank indicator (RI) for both cells in syslog
- Improved: Add iPerf3 to webGUI
Bug Fixes:
- Fixed: Preferred Power range does not match Power Modify range
- Fixed: WebGUI loading speed is slow when using HTTPS
- Fixed: Reboot notification is missing when changing IP address in webGUI
- Fixed: MMEs are incorrectly reporting to the OMC as disconnected