QRTB 2.7.8 - New eNB software has been released!

QRTB 2.7.8 for Nova 436Q/430 and Neutrino 430 TDD base stations has been released. This version mainly adds a number of mobility features and improves on uplink and scheduling performance.

Supported Hardware:
Nova 436Q (4*1W Outdoor eNB | mBS31001)
Nova 430 (4*250mW Outdoor eNB | pBS3101SE)
Nova 430i (4*250mW Outdoor eNB | pBS3101S)
Neutrino 430 (4*250mW Indoor eNB | pBS31010)

Software Download: https://na.baicells.com/download/BaiBS_QRTB_2.7.8.IMG


Version BaiBS_QRTB_2.7.8

New Features:
- Added: MOCN support
- Added: X2 support
- Added: ANR support
- Added: MME Pool S1 handover
- Added: PFS Scheduler
- Added: Dynamic TTI scheduling
- Added: 3UE/TTI
- Added: Dynamically change target UL SINR for UEs based on RSRP

- Improved: Display UE IMSIs on Overview page when LGW is disabled
- Improved: Display uptime on Overview page
- Improved: ICMP latency decreased in 96 UE mode
- Improved: Increase target UL BLER from 5 to 10%
- Improved: Lower power if eNB antenna is not detected (damage prevention)

Bug Fixes:
- Fixed: Importing configuration file from another eNB SN will reset license controlled features
- Fixed: Cannot access eNB webGUI when configured with CGNAT IP address
- Fixed: eNB may coredump when UEs are trying to attach and eNB is at max UE capacity
- Fixed: [HaloB] Cat12 CPE cannot attach when HaloB is enabled
- Fixed: [HaloB] eNB may not go Active after software upgrade when in Standalone mode
- Fixed: [KPI] Statistic error in number of handover requests
- Fixed: [KPI] Statistic error in ERAB count
- Fixed: [KPI] Statistic error in average UL PRB count