VLAN Options Need Help


Is there a way the UE can support VLAN tagging? We are able to bridge through an untagged VLAN from the access point but that is just about it. It seems if we have a tagged VLAN the UE does not know what to do with it. For example, we give a public IP for internet (untagged) and private IP (tagged) for management on our Ubiquiti devices.

Any help would be much appreciated


I am wondering if you ever resolved this problem? We are using 802.1q tagged VLAN’s on some 5Ghz gear that needs to be replaced due to excessive noise and congestion in an area.

The eNB and cloudcore supports bridging, but not really. The CPE still NAT translates the packets and I cannot get the tagged VL’s across.

Any suggestions would be ideal!