BCE-ODU-1.0.1 - New outdoor CPE firmware has been released!

Welcome Announcements
1

BCE-ODU-1.0.1 for Atom R9 Outdoor (11/19.5 dBi) CPEs has been released.

To upgrade UE firmware to BCE-ODU-1.0.1 from Web GUI:

  1. Log into CPE with username/password.
  2. Go to System->Version Manager page.
  3. Click on “Choose File” and select the new firmware.
  4. Click Submit.

To upgrade UE firmware from the OMC:

  1. Navigate to the CPE->Strategy->Upgrade page.
  2. Click the Add button in the Upgrade Task pane.
  3. Schedule the upgrade by following the steps in the New Upgrade Task window.

3/8/17 UPDATE: Stability issues were found in version 1.0.1 which causes the CPE to lock-up after a 15-day runtime. The link has been replaced with version 1.0.3 which is a stop-gap version until the stability bug is fully resolved. Version 1.0.3 adds an automatic reboot feature which reboots the CPE every 7 days.

Download: https://na.baicells.com/download/BCE-ODU-1.0.3-20170215.tgz

Changelog:

==========================
Version BCE-ODU-1.0.1
--------------------------
New Features:
- Added: Changed default LAN IP to 192.168.254.1
- Removed: Most Recently Used Table (MRU)

Bug Fixes:
- Fixed: RRC camping bug causing UE to be stuck in EMM-DEREGISTERED state
- Fixed: PCI Lock bug
- Fixed: TR069 bug which causes CPE to reboot if socket closes prematurely
- Fixed: Networking bug which can cause existing threads to use old IP address after CPE reattach

Improvements:
- Improved: Detection of USIM
- Improved: Requirement to reboot CPE again if upgrading from firmware version R5

Known Issues:
- Issue: A manual reboot may still be required if upgrading from firmware version R5 (10% of R5 CPEs required a second reboot from lab tests)
- Issue: S1 reconnect may cause default route to drop
2

This one is not for the 2.5GHz ODUs, right?

3

This version is for 2.5GHz ODUs as well. :slight_smile:

1 Like
4

Having an issue after updating firmware, it does not complete after waiting for 15 mins then when I click out of it , I can’t log into the cpe via 192.168.1.1. Any thoughts? CPE still has connectivity to internet tho.

5

CPE IP address will change to 192.168.254.1 after upgrade.

6

Do the CPE units not get/give a LAN IP while not associated to it’s LTE AP? I’m looking to upgrade firmware in-shop before deploying customer equipment.

Thanks.

7

By default, the CPE has DHCP server enabled and will hand out an IP address over the LAN interface. Please note that the CPE IP address changes to 192.168.254.1 after the upgrade.

I have also updated the post to link to version 1.0.3 as version 1.0.1 has a critical stability issue.

8

Update to BCE-ODU-1.0.3 https://baicells.zendesk.com/hc/en-us/articles/115004150448-BCE-ODU-1-0-3

9

hi
i deleted some files in my cpe cw0100 outdor lte ( i mean modem system file’s)
and my modem dont assign ip anymore
its need to flash firmware by other ways
how can i cannect it to com port or usb to flash it again ?
its dont have usb port
how can i connect wire’s to pcb and flash by com port ?
is that possible ?