The OMC and BOSS section of CloudCore is being upgraded on February 22nd at midnight PT (Pacific Time).
Downtime is expected to last 1 hour and the CloudCore portal may not be accessible during this time. This upgrade will have no impact on UE or eNB connectivity to the Cloud EPC as well as the DP SAS service.
Changelog:
===================================
OMC Version 8.3 & BOSS Version 8.3
-----------------------------------
New Features:
- Added: OMC: [SAS] Display SAS grants information in CBSD Settings page
- Added: OMC: [SAS] Support multi-grants for CPE
- Added: OMC: Support management for Aurora243(5G)
- Added: OMC: Support management for Pulsar(5G)
- Added: OMC: Add "Antenna Configuration" parameter in DC mode in Install Params section
- Added: OMC: Enable to upgrade module firmware for CPE
- Added: OMC: Support EARFCN history for eNB
- Added: OMC: View CPE PCI history
- Added: OMC: Replace Self-Start with new Plug-and-Play function
- Added: OMC: Enable batch import eNB SNs to a specific device group
- Added: OMC: Support multiple MMEs and PLMNs, micro mode, signal tracing, automatically calculating eci for Nova 846
- Added: OMC: Batch delete option added to the KPI Generate report page
- Added: OMC: Add license expiration alarm for QRTB eNB
- Added: OMC: Add eNB ECI conflict alarm
- Added: OMC: CBRS Release 2 (new Group types added)
- Added: OMC: Add eNB ID and Cell ID on the eNB Monitor page
- Added: OMC: Confirm eNB IBW before requesting grants when eNB is in CA mode and SAS is enabled
- Added: OMC: Configure DNS settings on CPE > Monitor page
- Added: OMC: Print all SAS important and abnormal heartbeat info in log
- Added: OMC: Frequency lock added for 5G CPE
- Added: OMC: Support configuration of WiFi5/WiFi6 settings for CPE
- Added: OMC: Add column for product name on CPE Monitor page
- Added: OMC: Support HaloB for 5G eNB
- Added: OMC: Support multi-step registration for imported CBSDs
- Added: OMC: Add additional time check (Tolerance Duration) on alarm notification
- Added: OMC: Add SAS connectivity alarm ("Network connectivity issue with SAS server")
- Added: OMC: Turn on/off RF on Nova 846
- Added: OMC: Support CPE log download in CPE information page
- Added: OMC: Add CPE Sim card exception alarm
- Added: OMC: Display "Attached" relation between eNB and CPE in the map
- Added: OMC: Add device event causes
- Added: OMC: Add Nova 846 EU/RU number and status on the monitor page
- Added: OMC: Display the relation between Snap Router and CPE
- Added: OMC: Support exporting config file for QRTB eNB
- Added: CloudCore: Add admin user on sub-account to access Google SAS portal
- Added: CloudCore: Support to query IMSIs and subscriber list via BOSS API
Improvements:
- Imporved: OMC: Customerize columns in eNB/CPE monitor as well as CBSD list
- Imporved: OMC: Allow to disable automatic module firmware
- Improved: OMC: Allow user to clean SAS log and maximize the log window
- Improved: OMC: Display Scell information (DC or CA mode)in eNB information page
- Improved: OMC: Configure RET antenna parameters in MML
- Improved: OMC: Manually set GPS coordinates for CPE
- Improved: OMC: Add eNB IP column in eNB CBSD table
- Improved: OMC: Support Macro mode setting for Nova 846
- Improved: OMC: Allow to reset LMT login password for Nova 846
- Improved: OMC: Add KPI counters for gNB/eNB
- Improved: OMC: DP will properly deregister the CBSD if device is removed from the OMC
- Improved: OMC: Move alarm email notification setting back to Alarm/View page
- Improved: OMC: Enable to drag and drop the preferred channels in the CBSD Settings page
- Improved: OMC: Add Config 6 (DL: UL=3:5) option on SubFrame Assignment
- Improved: OMC: Remove "128-EIA3" from Security Setting in the eNB settings page
- Improved: OMC: Support PTP configuration for 436Q
- Improved: OMC: Speed up MML response
- Improved: OMC: Enable to select a device based on IP address in the device upgrade page
- Improved: OMC: Attempt to upgrade devices again after upgrade failure the first time
- Improved: OMC: Increase the batch log collection from 5 to 100
- Improved: OMC: Automatically dispatch configuration to eNB when it is online
- Improved: OMC: Add additional text in alarm details
- Improved: OMC: Support CPE batch import with SN list
- Improved: OMC: Support CPE batch upgrade with SN list
- Improved: OMC: Update CloudKey on CPE while moving to a different operator
- Improved: OMC: Support more parameters in bulk CPE parameters configuration
- Improved: OMC: Support CPE SNMP function
- Improved: OMC: Add bandwidth, S1 mode and maximum power in the eNB settings page
- Improved: OMC: Rename "cell ID" to "Cell ID" on the eNB monitor page
- Improved: OMC: Add 15 minutes to the KPI report function
- Improved: OMC: Add weekly and monthly KPI report
- Improved: OMC: Configure CA mode only require one time reboot instead of twice
- Improved: OMC: Optimization on user group and user role
- Improved: OMC: Allow CloudKey to be case insensitive
- Improved: OMC: Support configuring Get UE IMSI switch
- Improved: OMC: Batch add and modify eNB name
- Improved: CloudCore: Change "IMSI" to "SN", and add "Name" and "Device Type" on the QTY link page in "Upcoming invoice" section
- Improved: CloudCore: Reword "Send email per name" to "New device email notification" in "New Device" section
Bug Fixes:
- Fixed: OMC: Failed to create the same level group
- Fixed: OMC: Failed to upgrade CPE
- Fixed: OMC: Displaying issue on sync status (Unsynchronized) for QAFA
- Fixed: OMC: Failed to sync CPE name
- Fixed: OMC: False sync status
- Fixed: OMC: False KPI report status
- Fixed: OMC: Display wrong product name
- Fixed: OMC: No response to MML execution when dealing with large amounts of devices
- Fixed: OMC: Check spelling errors in operational log
- Fixed: OMC: Bandwidth and frequency not grayed out in MML for SAS-enabled QRTB and Nova 846
- Fixed: OMC: eNB Cell name is not consistant between LMT and OMC
- Fixed: OMC: Cannot change frequency and bandwidth in setting page for QRTB
- Fixed: OMC: GPS information is not available in Monitor page and MML page
- Fixed: OMC: eNB falsely displays as connected in eNB monitor page
- Fixed: OMC: Cell 2 shows unknown name and Cell1 is empty on eNB without configuring name in DC mode
- Fixed: OMC: MBSSID is not editable after enabling WiFi in CPE Plug-and-Play
- Fixed: OMC: No response after clicking "download" button to download CPE all device log files
- Fixed: OMC: Normal user can view operational log of admin user
- Fixed: OMC: Unable to delete devices in Inventory/Device page
- Fixed: OMC: Cannot display statistics on the monitor page
- Fixed: OMC: User logout when clicking "Export for CBSD Params" on the SAS monitor page
- Fixed: OMC: CPE falsely displays offline though it is actually online in CPE webGUI
- Fixed: OMC: Alarm numbers are not consistent between overview statistics and the total number in alarm page
- Fixed: BOSS: Cannot modify UL/DL in service plan page